W623
Knauf attachment shell with CD 60/27, directly attached
The attachment formwork system W623.de is designed with a substructure made of sheet steel profiles CD 60/27, which are attached to the base wall with direct (swing) suspension. Thus, slim design in conjunction with large wall heights can be realized. The planking is one or two layers. In case of execution with double planking ball impact safety is possible.
■ Directly attached
■ Stator axle distance up to 625 mm
■ Wall height up to 10 m
■ Soundproofing improvement when installing insulation layer and a direct swinging suspension
W625.de
Knauf Freestanding attachment shell with CW profile
W626.de
Knauf Freestanding attachment shell with CW profile
The attachment formwork system W626.de is designed with a substructure made of sheet steel profiles CW 50/75/100 as a single stand freestanding in front of the base wall. The planking in the system W626.de is two or three layers. Due to the freestanding design any large wall cavities can be realized, there is no dependence on the strength of the base wall.
■ Freestanding
■ Stator axle distance up to 625 mm
■ Wall height up to 7.80 m
■ With multi-layer planking, ball-proof
■ Soundproofing improvement when installing insulation layer
W653.de
Knauf Freestanding attachment shell with CW profile
The attachment formwork system W653.de is designed with a substructure made of sheet steel profiles CW 75/100 as a single stand freestanding in front of the base wall. The planking with solid building boards is horizontal and single-layered.
Due to the freestanding design any large wall cavities can be realized, there is no dependence on the strength of the base wall. With the cladding made of solid construction boards, requirements for sound insulation and robustness can be fulfilled in one layer and stand distances of up to 1000 mm are possible.
■ Freestanding
■ Stator axle distance up to 1000 mm
■ Wall height up to 5.90 m