Ceiling clothing (directly attached) and suspended ceilings (suspended)
Knauf ceiling systems consist of a suspended or directly attached substructure, which is covered with plasterboard. The numerous requirements from the applications are covered by a large number of variants.
Plasterboard ceiling coverings and underlays are used under solid ceilings, Holbakendecken or trapezoidal sheet metal ceilings to improve the fire / sound or thermal insulation, to create an installation level between raw ceiling and viewing ceiling and to regulate the ceiling height and not least for creative reasons.
The ceiling system D111.de with a wooden substructure can be executed both without and with fire protection in different planking variants.
The profile for ceilings and wallcoverings in drywall
Cold-formed sheet steel profiles with C-shaped cross-section according to EN 14195 for use as a base or supporting profile of suspended ceilings and as a stud profile for wall cladding / facing shells.
The D113.de ceiling system with low construction heights consists of a level substructure made of sheet steel profiles CD 60/27 as a base and support profiles and planking of plasterboard. The ceiling system can be executed both without and with fire protection in different planking qualities. This fire protection is available in the qualities F30 and F90.
The ceiling system D116.de for increased UK distances consists of a substructure made of sheet steel profiles UA 50/40 as base profiles and CD 60/27 as support profiles and a planking of plasterboard. The ceiling system can be executed both without and with fire protection in different planking qualities. This fire protection is available in the qualities F30 and F90.
Knauf Cantilever ceilings are suspended ceilings which are fixed exclusively to the walls.
Knauf cantilevered ceilings are suspended ceilings which are fixed to the walls. A suspension from the raw ceiling is therefore no longer necessary.
The Knauf gypsum boards are screwed onto a metal substructure made of Knauf CW profiles as single or double profiles.
As suspended ceilings under solid ceilings, beamed ceilings and trapezoidal sheet metal ceilings used to improve the fire / sound or thermal insulation, for the production of a completely free installation level between raw ceiling and visible ceiling and to regulate the ceiling height.
The fire protection is effective depending on the ceiling system alone through the plasterboard ceiling or is obtained by the interaction of plasterboard ceiling and raw ceiling.
Directly applied gypsum (composite) plates
Knauf panels or composite panels are applied to existing walls using tie-down binders, joint filler lightweight or flexible adhesive Multi without substructure.
Dry plaster is an alternative to wet plastering, without additional building moisture in stable ground. For flat, high-quality surfaces in the shortest possible construction time.
“Dry” hollow floor system made of high-strength GIFAfloor gypsum fibre elements on hollow floor supports.
The hollow floor system GIFAfloor FHB is ideal for particularly fast construction. The high-strength gypsum fibre elements, designed as a single-layer or two-layer support layer, are mounted directly on the support elements and glued together. Very high cavities up to 119 cm are possible (depending on support). Depending on the version, requirements up to load class 12.5 are met.
Preference is given to using “dry” hollow floors in office and administration buildings when it comes to construction sites or when very high loads are applied.
Also in computer centres, training and research rooms as well as in workshops and production areas, they are often used. With the appropriate design requirements for sound, heat and fire protection can be met. It is also possible to ventilate, heat or cool the building via a “dry” hollow floor system.
Knauf exterior wall systems consist of a substructure with corrosion-protected sheet steel profiles and planking of Aquapanel boards/gypsum plasterboards.
Knauf exterior wall systems meet all the requirements of non-supporting exterior walls. Due to the low weight, the high insulation effect and the non-combustible system components, they are suitable for a wide variety of building types.
