Mounting walls with a substructure of sheet steel profiles and one-sided planking of radiation protection plates.
X-ray examination rooms require structural radiation shielding to neighbouring rooms. Knauf Radiation Protection Systems are used in the field of X-ray diagnostics and X-ray therapy.
With Knauf Safeboard radiation protection plates and possibly a cover layer made of diamond plates, such constructions are particularly economical.
In the case of high radiation protection requirements (high lead equivalent), radiation protection trays are coated with Bleibelch radiation protection plates with 0.5-3 mm thick lead sheet lamination.
Knauf Radiation Protection Attachment Safeboard – Directly Attached
The directly mounted Knauf K151S.de radiation protection shroud system with the lead-free plate Safeboard minimizes the additional effort compared to conventional lead-free radiation protection drywall systems. The lower dead weight of the Safebaord compared to lead-laminated plates simplifies the design. Fire protection and high sound insulation requirements are also met.
The freestanding Knauf K152.de Radiation Protective Shutter System with the lead-free plate Safeboard minimizes the additional effort compared to conventional lead-acid dry box systems. The lower dead weight of the Safebaord compared to lead-laminated plates simplifies the design. Fire protection and high sound insulation requirements are also met.
The directly fixed Knauf Radiation Protection Formwork System K151B.de with lead-laminated gypsum boards. With high demands on the radiation protection (high lead equivalent), radiation protection facing shells are planked with radiation protection plates with 0.5-3 mm thick sheet metal lamination.
Directly applied gypsum (composite) plates
Knauf panels or composite panels are applied to existing walls using tie-down binders, joint filler lightweight or flexible adhesive Multi without substructure.
Dry plaster is an alternative to wet plastering, without additional building moisture in stable ground. For flat, high-quality surfaces in the shortest possible construction time.
Knauf Cubo room-in-room systems are self-supporting room systems that can be freely set up in the room
Knauf Cubo Room-in-room systems are self-supporting room systems that can be freely placed in the room, which can also be connected to existing components.
The Knauf Cubo room-in-room systems are widely used as space-building measures. Requirements for fire protection, sound insulation and static loads are covered. Applications:
Knauf exterior wall systems consist of a substructure with corrosion-protected sheet steel profiles and planking of Aquapanel boards/gypsum plasterboards.
Knauf exterior wall systems meet all the requirements of non-supporting exterior walls. Due to the low weight, the high insulation effect and the non-combustible system components, they are suitable for a wide variety of building types.
“Dry” hollow floor system made of high-strength GIFAfloor gypsum fibre elements on hollow floor supports.
The hollow floor system GIFAfloor FHB is ideal for particularly fast construction. The high-strength gypsum fibre elements, designed as a single-layer or two-layer support layer, are mounted directly on the support elements and glued together. Very high cavities up to 119 cm are possible (depending on support). Depending on the version, requirements up to load class 12.5 are met.
Preference is given to using “dry” hollow floors in office and administration buildings when it comes to construction sites or when very high loads are applied.
Also in computer centres, training and research rooms as well as in workshops and production areas, they are often used. With the appropriate design requirements for sound, heat and fire protection can be met. It is also possible to ventilate, heat or cool the building via a “dry” hollow floor system.
